ExoHERO®
Shorten the time to isolate extracellular vesicles without sacrificing recovery. ExoHERO® combines high binding capacity and mild processing conditions for gentle purification of these large and fragile modalities resulting in high recoveries even at high flow rates.
Compress your EV workflow and increase the efficiency of both developing and delivering these highly promising therapeutic agents.
This product is covered by or for use under one or more patents (astreabioseparations.com/patents) and is provided subject to the terms of a Limited Use Label License Agreement (LULL). Accessible at: astreabioseparations.com/terms
| Name | SKU | Price | Quantity |
|---|---|---|---|
| ExoHERO® 1 | EH0001001A | $5,500.00 | |
| ExoHERO® 10 | EH0010001B |
Product Details
Please Select Your ProductKey Features:
- High binding capacity, equivalent to 1.2E+12 particles/mL
- High recovery due to mild conditions
- Fast processing
- Sanitizable with 0.5 M NaOH
SKU:
EH0001001A
Product code:
EH0001001A
Binding chemistry:
Weak anion exchange
TYPICAL DYNAMIC BINDING CAPACITY
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
>60 mg/mL
Maximum Pressure at 20ºC:
6 Bar | 0.6 MPa | 87 psi
Bed Volume:
1 mL
Nominal Void Volume:
3.5 mL
Recommended Operational Flow Rate (MV/min):
5
Recommended Pre-Device Pressure:
3 Bar | 0.3 MPa | 43 psi
Chemical Stability:
Compatible with buffers commonly used in bioprocessing, including 20% EtOH, 1M acetic acid, 1M NaOH, and solutions containing up to 10mM EDTA
Connections:
Luer
Vent Valve:
Screw cap
Repeated Use:
Single batch use
Materials of Construction:
HOUSING: Polypropylene, Silicone
Functional membrane: modified cellulose acetate
Functional membrane: modified cellulose acetate
Compliance of Materials:
Product materials meet the requirements of the current USP Biological Reactivity test for plastics Class VI
Declarations of Suitability:
TSE/BSE free, Non-Animal derived, Nitrosamine free statements available
Quality:
Manufactured within an ISO 9001:2015 Quality Management System the product is controlled, traceable and released through the Quality function. For research use only.
Compliance of Performance and Identification:
FUNCTIONAL MEMBRANE: dynamic binding capacity test/Lot membrane
DEVICES: Representative device samples tested by pressure flow and performance test
DEVICES: Representative device samples tested by pressure flow and performance test
Key Features:
- High binding capacity, equivalent to 1.2E+12 particles/mL
- High recovery due to mild conditions
- Fast processing
- Sanitizable with 0.5 M NaOH
SKU:
EH0010001B
Product code:
EH0010001B
Binding chemistry:
Weak anion exchange
TYPICAL DYNAMIC BINDING CAPACITY
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
>60 mg/mL
Maximum Pressure at 20ºC:
6 Bar | 0.6 MPa | 87 psi
Bed Volume:
10 mL
Nominal Void Volume:
30.0 mL
Recommended Operational Flow Rate (MV/min):
5
Recommended Pre-Device Pressure:
3 Bar | 0.3 MPa | 43 psi
Chemical Stability:
Compatible with buffers commonly used in bioprocessing, including 20% EtOH, 1M acetic acid, 1M NaOH, and solutions containing up to 10mM EDTA
Connections:
Sanitary flange (12.7mm)
Vent Valve:
Screw cap
Repeated Use:
Single batch use
Materials of Construction:
HOUSING: Polypropylene, Silicone
Functional membrane: modified cellulose acetate
Functional membrane: modified cellulose acetate
Compliance of Materials:
Product materials meet the requirements of the current USP Biological Reactivity test for plastics Class VI
Declarations of Suitability:
TSE/BSE free, Non-Animal derived, Nitrosamine free statements available
Quality:
Manufactured within an ISO 9001:2015 Quality Management System the product is controlled, traceable and released through the Quality function. For research use only.
Compliance of Performance and Identification:
FUNCTIONAL MEMBRANE: dynamic binding capacity test/Lot membrane
DEVICES: Representative device samples tested by pressure flow and performance test
DEVICES: Representative device samples tested by pressure flow and performance test
Product Details
Key Features:
- High binding capacity, equivalent to 1.2E+12 particles/mL
- High recovery due to mild conditions
- Fast processing
- Sanitizable with 0.5 M NaOH
SKU:
EH0001001A
Product Specifications
Product code:
EH0001001A
Binding chemistry:
Weak anion exchange
TYPICAL DYNAMIC BINDING CAPACITY
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
>60 mg/mL
Maximum Pressure at 20ºC:
6 Bar | 0.6 MPa | 87 psi
Bed Volume:
1 mL
Nominal Void Volume:
3.5 mL
Recommended Operational Flow Rate (MV/min):
5
Recommended Pre-Device Pressure:
3 Bar | 0.3 MPa | 43 psi
Chemical Stability:
Compatible with buffers commonly used in bioprocessing, including 20% EtOH, 1M acetic acid, 1M NaOH, and solutions containing up to 10mM EDTA
Connections:
Luer
Vent Valve:
Screw cap
Repeated Use:
Single batch use
Materials of Construction:
HOUSING: Polypropylene, Silicone
Functional membrane: modified cellulose acetate
Functional membrane: modified cellulose acetate
Compliance of Materials:
Product materials meet the requirements of the current USP Biological Reactivity test for plastics Class VI
Declarations of Suitability:
TSE/BSE free, Non-Animal derived, Nitrosamine free statements available
Quality:
Manufactured within an ISO 9001:2015 Quality Management System the product is controlled, traceable and released through the Quality function. For research use only.
Compliance of Performance and Identification:
FUNCTIONAL MEMBRANE: dynamic binding capacity test/Lot membrane
DEVICES: Representative device samples tested by pressure flow and performance test
DEVICES: Representative device samples tested by pressure flow and performance test
Product Details
Key Features:
- High binding capacity, equivalent to 1.2E+12 particles/mL
- High recovery due to mild conditions
- Fast processing
- Sanitizable with 0.5 M NaOH
SKU:
EH0010001B
Product Specifications
Product code:
EH0010001B
Binding chemistry:
Weak anion exchange
TYPICAL DYNAMIC BINDING CAPACITY
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
Bovine serum albumin at 1mg/mL in 10mM at Tris pH 8:
>60 mg/mL
Maximum Pressure at 20ºC:
6 Bar | 0.6 MPa | 87 psi
Bed Volume:
10 mL
Nominal Void Volume:
30.0 mL
Recommended Operational Flow Rate (MV/min):
5
Recommended Pre-Device Pressure:
3 Bar | 0.3 MPa | 43 psi
Chemical Stability:
Compatible with buffers commonly used in bioprocessing, including 20% EtOH, 1M acetic acid, 1M NaOH, and solutions containing up to 10mM EDTA
Connections:
Sanitary flange (12.7mm)
Vent Valve:
Screw cap
Repeated Use:
Single batch use
Materials of Construction:
HOUSING: Polypropylene, Silicone
Functional membrane: modified cellulose acetate
Functional membrane: modified cellulose acetate
Compliance of Materials:
Product materials meet the requirements of the current USP Biological Reactivity test for plastics Class VI
Declarations of Suitability:
TSE/BSE free, Non-Animal derived, Nitrosamine free statements available
Quality:
Manufactured within an ISO 9001:2015 Quality Management System the product is controlled, traceable and released through the Quality function. For research use only.
Compliance of Performance and Identification:
FUNCTIONAL MEMBRANE: dynamic binding capacity test/Lot membrane
DEVICES: Representative device samples tested by pressure flow and performance test
DEVICES: Representative device samples tested by pressure flow and performance test
